Our standard salt mist systems for ISO 9227
The salt mist test according to DIN EN ISO 9227
In a salt mist test, the samples to be tested are subjected to a sodium chloride mist atmosphere at an elevated temperature. This process simulates the stress on the test items caused by corrosive, oxidizing media in fast motion. Other spray solutions such as acetic acid (AASS) or copper chloride (CASS) can also be used.
ISO 9227 NSS/ASS/CASS
ISO 60068-2-11
ASTM B117
Furthermore, the salt mist test mentioned above can be combined with other test methods. This results in alternating corrosion tests with cyclic processes and controlled temperature and humidity. Below you will find an example selection:
ISO 6270-2 CH/AT/AHT
ISO11997-1
VDA621-415
VW 1210
ISO 60068-2-52
SAEJ2334
NissanCCT1
Ford
The possible tests can be found in the technical documentation and may vary depending on the system!
Salt mist systems for front loading
KV-VLM model series
300L to 3500L
- Transparent glass pane for easy loading from the front
Condensation water constant (CH) and alternating climate tests (AHT, AT), Kesternich tests
Salt spray tests (SAL)
Condensation tests (CON)
Ventilation with room air/warm air, CCT climate change tests
ClimaCORR® climate change tests with controlled humidity and forced warm air drying
Condensate systems with 300L
KV-C model series
These compact and easy-to-use benchtop cabinets are designed to carry out condensation tests (constant humidity) according to the most common international corrosion test standards such as:
EN ISO 6270-2:2005
ASTM D2247
Cabinets with the AIR or ADO option are designed for the additional water
Condensation tests suitable:
Changing temperature (AT)
Changing temperature and humidity (AHT)
With optional manual or electronic dosing systems for SO2 gas, the (KES) version of the CON 300-FL test cabinet is suitable for carrying out Kesternich tests according to:
DIN EN ISO 6988 (DIN 50018)